|
|
Ready Air Offers Four Workhorse Models,
Sized and Packaged to Meet Your Specific Needs
At Ready Air, we build reliable, industrial-grade units, not hobby-shop toys.
Our units both outperform and outlive other 12V compressors. Each one is
built to be able to withstand extreme conditions.
Check out the four models detailed below, or skip down to review a listing
of typical applications for our compressors.
Two-Stage Strength
Ready Air Two-Stage Installed Air Compressor
Model #12500
Available as a unit ready to install in a vehicle with an ASME 200# (or more)
air receiver(s) and wire into its 12-volt electrical system for fully automatic
operation. Unit is equipped with a check valve, a 200# ASME relief valve, a
pressure switch that opens at 175 psi, and a continuous-duty
solenoid
wired to the motor and pressure switch, all mounted on a steel base.
SPECIFICATIONS
Rating: 12-volt dc
Grade: Industrial
Style: Installed in-place or in-vehicle, in any position
Dimensions: 12"W x 8"H x 18"L
Output: 1.1 cfm of air @ 175 psi on continuous duty
Requirements: Uses only 42 amps @ full load
Features: Two-stage, oil-less
Price: Please Call
Weight: 47 lbs.
Part #: 12500
ORDER
Single-Stage Durability
Ready Air Single-Stage Installed Air Compressor
Model #12200
Available as a unit that will operate off any 12-volt car, truck, or tractor
battery. Should be installed with a suitable air tank and wired into a 12-volt
DC electrical system for fully automatic operation. The unit is equipped with
a check valve, 140# ASME relief valve, a pressure switch (opens at 120 psi),
and a continuous-duty solenoid wired to motor and pressure switch, all
mounted to a steel base plate with a thick rubber isolation pad.
SPECIFICATIONS
Rating: 12-volt dc
Grade: Industrial
Style: Installed in-place or in-vehicle, in any position
Dimensions: 9"W x 7"H x 14"L
Output: 1.1 cfm @ 75 psi with a maximum of 120 psi
Requirements: Uses less than 30 amps @ full load--no heavy-duty
alternator needed
Features: Single-stage, oil-less
Price: Please Call
Weight: 34 lbs.
Part #: 12200
ORDER
Portable Convenience
Ready Air Portable Single-Stage Air Compressor
Model #12100
This hand-carried, fully portable unit comes with a 25' rubber air hose and
air chuck, 8' electric cable with heavy-duty battery post clamps, all built into
a plywood box that has been dipped in urethane to seal the wood from
moisture. Ribbed vinyl covered top and bottom surfaces to minimize sliding.
SPECIFICATIONS
Rating: 12-volt dc
Grade: Industrial
Style: Easily carried to any location
Dimensions: 15-1/2"W x 10-3/4"H x 9-3/4"L
Output: Over 1 cfm @ 75 lbs. pressure
Requirements: Uses less than 30 amps @ full load
Features: Portable, oil-less
Price: Please Call
Weight: 40 lbs.
Part #: 12100
ORDER
AAA System
Model #12300
The ACT Ready Air 12V DC Air Compressor System Model 12300 combines
the single-stage unit with an air tank in a protective mounting cage for a
complete system that can be bolted to any horizontal or vertical surface.
The system can be mounted with the air tank on top or remote from the
compressor. Model 12300 supplies high compressed air over sustained
periods of time.
SPECIFICATIONS
Rating: 12-volt dc
Grade: Industrial
Style: Installed in-place or in-vehicle, in any position
Dimensions: 9"W x 18.5"H x 30"L
Output: 1.1 cfm @ 75 psi with a maximum of 120 psi
Requirements: Uses less than 30 amps @ full load--no heavy-duty
alternator needed
Features: Single-stage, oil-less
Price: Please Call
Weight: 62 lbs.
Part #: 12300
ORDER
TYPICAL USES
|
|
